ESTD PERPUSTAKAAN UNTAD
ESTD PERPUSTAKAAN UNTAD
| JudulPembuatan Kurva Pembebanan Pada Transformator DIstribusi Berbasis Data Logger |
| Nama: RAHAYU SYAHAR |
| Tahun: 2021 |
| Abstrak A distribution transformator load is a curve that describes the variation in load the distribution transformator. The benefits of load curves are to find out the differences in power intake and the availability of power each time. To establish a load curve is to measure the value of current, voltage, and cosphi or active power hourly. Currently to measure current, voltage, and cosphi on the distribution transformer was done manually. This manual measurement also occured in co-transformators. Therefore the purpose of this study is to create a load curve by designing a current, voltage, cosphi data logger-based monitoring tool.From this research it can be concluded that the load curve on the co-transformators corresponds to the characteristics of the residential load curve, it was due to the load connected to the co-transformators is a household load currently. From the load curve for three days with a duration of 1 hour can be seen that at lowest load occur at 1 to 2 pm with a load of about 120 Watts while the peak load occur at 8 to 9 pm with a load of about 3000 Watts. From this load curve it can also be seen that the lowest load factor especially in the S phase is about 0.28%, meaning there is still abundance of power that can be channeled by the co-transformators. Keywords: monitoring, distribution transformators, data logger, load curve |