ESTD PERPUSTAKAAN UNTAD
ESTD PERPUSTAKAAN UNTAD
| JudulINTEGRASI PLTS DENGAN SEPEDA STATIS GENERATOR DC MAGNET PERMANEN |
| Nama: SADDAM HUSSEIN DUA TONDOK |
| Tahun: 2023 |
| Abstrak This study discusses the integration of PLTS with Permanent Magnet DC Generator SatisBikes in which the power from the two sources alternately charges the battery. The output voltage generated from both sources is unstable. By utilizing a Buck converter to stabilize the voltage from the output side of the source, so that it can be directly used for charging the battery. The purpose of this research is to make a device that is able to stabilize the output voltage from two different sources to charge the battery. The method used in this study is the Arduino control, where the best voltage is from both sources or reaches 13.8 volts which will later charge the battery. Based on the test results, this tool is able to stabilize a voltage of 65-32 volts from the permanent magnet generator and a voltage of 17.19-18.3 volts from photovoltaic to a constant voltage of 13.8 Volts. For charging a 12 volt battery, 7.2Ah can be done for 5 hours. The battery voltage before charging is 9.83V and after charging is 12.62 volts. The battery loading was carried out for 2 hours using a 12V 10 watt DC lamp. Keywords: Integration of stationary bicycle power generator, permanent magnet generator, PLTS |